Preparing a Linocut Block for printing

Here a few quick tips on getting your linocut block prepared ready for printing.

1. Before you start carving or printing a linocut block  you can gently remove the waterproof coating.

Linocut blocks are coated in a waterproof coating – if you place a drop of water on the surface it will bead and not soak in.

I remove this coating with a superfine grade ‘wet’ sandpaper – using a small amount of water I gently rub the surface with the sandpaper.

You will see the coating coming off easily – I then towel dry the block. If you then place a drop of water on the surface it will soak in. Make sure you allow the linoblock is completely dry before you print.

2. I trim the edges of the block to make a clean line for the print using a steel ruler and a sharp bladed knife. Traditional linocut blocks have a hessian backing.

3. When you trim a linocut block this hessian backing needs to be further trimmed back to ensure none of the hessian stringing is left – this string can easily pick up ink when you are printing and create unsightly marks onto the surface of the print.

4. I use scissors to trim – first from the front and then I turn the block over and check of there are any pieces of string that may slowly come undone whilst printing and I trim these back as well.

I regularly check the block whilst printing to ensure no stray fine hairs are still there and picking up ink. It is easy to miss one and it is not until it marks the print that you realise it is there.

Within the outside white section of the image on the right you can see a fine white line – this is one of the small and often extremely fine hairs that can easily ruin a great print – just ask me I know!!

The image on the right shows the fine marks that can occur from these hairs picking up the ink. I have discarded many prints (which is quite costly) because of this. The image on the left shows a large section of the hessian backing that would definitely pick up ink and transfer to a print.

_____________________________________________

I try to keep a particular standard to the prints I include within an edition and work at improving my skills on an ongoing basis. I am finding that as my actual printing technique and knowledge of printmaking improves so the standards I want within each print of an edition, also increases.

I am always seeking to learn new and improved techniques and tips through a variety of sources. I am very aware that over time my printmaking skills have improved and as a result so have the prints!

I hope this information helps other linocut printmakers in identifying this and other  common printing mistakes.

One of the other ingredients I use when printing it music – I always print with music playing (usually loudly) I find it helps with creating a space, mindset and rhythm for printing which is essentially a very carefully constructed hand-produced production line activity.

Copyright – Lynette Weir
Advertisements

2 thoughts on “Preparing a Linocut Block for printing”

    1. I use a variety of printmaking papers but commonly Arches to Saunders Waterford both Hot Pressed so it has a smooth surface as opposed to a rough surface used in watercolour. I also use some handmade papers & Japanese papers at times. Not sure where you are from but Melbourne Etching Supplies has a sale at the moment including printmaking papers. The main criteria is to try & get a good quality paper that is acid free – then just experiment it really depends on what effect you want for the final artwork – different papers can completely change an artwork.
      Kind regards
      Lyn

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s